This one is very simple. It was functional, but I opened it up like I always do when I get something new, I mean, I’m into electronics! Right? Any who, the grommet moved around and so did the cable. Because of that, the ground/shielding wire was about to snap. I repaired that and found a way to make the grommet not move anymore. I placed some paint tape to the enclosure so that the glue would have something to stick to. I doesn’t look too pretty but it does the job alright.

Back plate.

Look at the ground/shielding wire!

Cut some of the tubing, before twisting the shielding wire.

Rewired.

Grommet and cable glued to the enclosure.

And done! One less thing to worry about when using the RA-200.

Advertisements